Uncompressing Linux..................................................................................... done, booting the kernel.

Linux version 2.6.19-h1940 (rtp@jules) (gcc version 4.1.1 ()) #812 PREEMPT Sun Dec 3 21:53:10 CET 2006

CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177

Machine: IPAQ-H1940

Memory policy: ECC disabled, Data cache writeback

CPU S3C2410 (id 0x32410000)

S3C2410: core 270.000 MHz, memory 135.000 MHz, peripheral 67.500 MHz

S3C24XX Clocks, (c) 2004 Simtec Electronics

CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on

S3C2410 Power Management, (c) 2004 Simtec Electronics

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Built 1 zonelists.  Total pages: 16256

Kernel command line: console=ttySAC2,9600n8 console=tty0 keepinitrd ramdisk_size=16000 root=/dev/ram rw panic=900 init=/linuxrc g_serial.use_acm=1 g_file_storage.file=/dev/ram

Unknown boot option `g_serial.use_acm=1': ignoring

Unknown boot option `g_file_storage.file=/dev/ram': ignoring

irq: clearing pending status 00004000

irq: clearing pending status 00008000

irq: clearing subpending status 000001d2

irq: clearing subpending status 00000092

PID hash table entries: 256 (order: 8, 1024 bytes)

timer tcon=00501109, tcnt dbb9, tcfg 00000218,00000310, usec 000016c1

Console: colour dummy device 80x30

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 60932KB available (2228K code, 408K data, 100K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics

Registering sysclass

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

NET: Registered protocol family 16

wake enabled for irq 50

S3C2410: Initialising architecture

 0:               xdreq0, channels 0---

 1:               xdreq1, channels -1--

 2:                  sdi, channels 0-23

 3:                 spi0, channels -1--

 4:                 spi1, channels ---3

 5:                uart0, channels 0---

 6:                uart1, channels -1--

 7:                uart2, channels ---3

 8:                timer, channels 0-23

 9:              i2s-sdi, channels -12-

10:              i2s-sdo, channels --2-

11:               <NULL>, channels ----

12:               <NULL>, channels ----

13:               <NULL>, channels ----

14:              usb-ep1, channels 0---

15:              usb-ep2, channels -1--

16:              usb-ep3, channels --2-

17:              usb-ep4, channels ---3

Bluetooth: Core ver 2.11

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

NET: Registered protocol family 2

IP route cache hash table entries: 512 (order: -1, 2048 bytes)

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 2048 bind 1024)

TCP reno registered

h1940-batt successfully loaded

charged

charged

h1940-ints successfully loaded

NetWinder Floating Point Emulator V0.97 (double precision)

io scheduler noop registered

io scheduler cfq registered (default)

s3c2410 Backlight Driver Initialized.

Console: switching to colour frame buffer device 60x53

fb0: s3c2410fb frame buffer device

S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics

s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410

s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410

s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410

RAMDISK driver initialized: 16 RAM disks of 16000K size 1024 blocksize

NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $

INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $

S3C24XX NAND Driver, (c) 2004 Simtec Electronics

s3c2410-nand s3c2410-nand: Tacls=2, 14ns Twrph0=6 44ns, Twrph1=3 22ns

NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND 32MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit":

0x00000000-0x02000000 : "Whole flash"

ftl_cs: FTL header not found.

0x00050000-0x00520000 : "Kernel"

ftl_cs: FTL header not found.

0x00520000-0x02000000 : "Root"

ftl_cs: FTL header not found.

s3c2410-nand s3c2410-nand: clock idle support enabled

ether gadget: using random self ethernet address

ether gadget: using random host ethernet address

usb0: Ethernet Gadget, version: May Day 2005

usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk

usb0: MAC 3a:2f:35:28:c6:2c

usb0: HOST MAC b2:5c:68:09:0b:3d

usb0: RNDIS ready

mice: PS/2 mouse device common for all mice

s3c2410-buttons s3c2410-buttons: successfully loaded

input: s3c2410-buttons as /class/input/input0

s3c2410 TouchScreen successfully loaded

input: s3c2410 TouchScreen as /class/input/input1

S3C24XX RTC, (c) 2004,2006 Simtec Electronics

s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling

s3c2410-rtc s3c2410-rtc: rtc intf: sysfs

s3c2410-rtc s3c2410-rtc: rtc intf: proc

s3c2410-rtc s3c2410-rtc: rtc intf: dev (254:0)

s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0

i2c /dev entries driver

s3c2410-i2c s3c2410-i2c: slave address 0x10

s3c2410-i2c s3c2410-i2c: bus frequency set to 383 KHz

s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter

Bluetooth: HCI UART driver ver 2.2

Bluetooth: HCI H4 protocol initialized

Bluetooth: HCI BCSP protocol initialized

Registered led device: h1940:green

Registered led device: h1940:red

Registered led device: h1940:blue

TCP cubic registered

NET: Registered protocol family 1

NET: Registered protocol family 17

Bluetooth: L2CAP ver 2.8

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO (Voice Link) ver 0.5

Bluetooth: SCO socket layer initialized

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: RFCOMM ver 1.8

Bluetooth: BNEP (Ethernet Emulation) ver 1.2

Bluetooth: BNEP filters: protocol multicast

s3c2410-rtc s3c2410-rtc: setting the system clock to 2035-06-01 00:01:30 (2064268890)

RAMDISK: Compressed image found at block 0

EXT2-fs warning: checktime reached, running e2fsck is recommended

VFS: Mounted root (ext2 filesystem).

Freeing init memory: 100K

usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet

ep_disable: ep3-bulk

saved f0000008 value 2540bd40

saved f000001c value 000001fa

s3c2410_pm_enter(3)

s3c2410_pm_prepare_check: 0 checks needed

s3c2410_sleep_save_phys=0x3203be70

saved f6800000 value 005f2f24

saved f6800004 value 0020c051

saved f6800010 value 00155511

saved f6800014 value 000005bc

saved f6800018 value 000007f6

saved f6800020 value aa940659

saved f6800024 value 000003ed

saved f6800028 value 0000ffff

saved f6800030 value aa84aaa0

saved f6800034 value 00000600

saved f6800038 value 0000faff

saved f6800040 value a5155555

saved f6800044 value 0000f800

saved f6800048 value 0000f7ff

saved f6800050 value 0000a82a

saved f6800054 value 000000f3

saved f6800058 value 000000ff

saved f6800060 value ffaaaaa2

saved f6800064 value 0000e7df

saved f6800068 value 0000ffff

saved f6800070 value 0000aaa6

saved f6800074 value 000007b4

saved f6800078 value 000007ff

saved f6800084 value 00000000

saved f0400000 value 00ffffff

saved f040000c value 0009fde0

saved f0100000 value 22602200

saved f0100004 value 00000700

saved f0100008 value 00000700

saved f010000c value 000057a4

saved f0100010 value 00000700

saved f0100014 value 00000700

saved f0100018 value 000057a4

saved f0400014 value 00000003

saved f0400004 value 0007f011

saved f0400008 value 00078023

saved f0400010 value 00000004

saved f0100024 value 00ac03e4

saved f0800000 value 00000003

saved f0800004 value 000003c5

saved f0800008 value 00000051

saved f080000c value 00000010

saved f0800028 value 00000048

saved f0804000 value 00000003

saved f0804004 value 00000245

saved f0804008 value 00000000

saved f080400c value 00000000

saved f0804028 value 0000001b

saved f0808000 value 00000043

saved f0808004 value 000003c5

saved f0808008 value 00000051

saved f080800c value 00000000

saved f0808028 value 000001b6

Disabling IRQ 16 (pin 160)

Disabling IRQ 17 (pin 161)

Disabling IRQ 18 (pin 162)

Disabling IRQ 49 (pin 165)

Leaving IRQ 50 (pin 166) enabled

Disabling IRQ 51 (pin 167)

Disabling IRQ 52 (pin 192)

Disabling IRQ 54 (pin 194)

Disabling IRQ 55 (pin 195)

Disabling IRQ 56 (pin 196)

Disabling IRQ 57 (pin 197)

Disabling IRQ 58 (pin 198)

Disabling IRQ 59 (pin 199)

sleep: irq wakeup masks: ffffffff,ffffffbf

GSTATUS3 0x30456160

GSTATUS4 0x00000000ÿÿÿ